24-50LB PAILS ON A PALLET POLYESTER PATCHING SYSTEM CONCRETE RAPID HARDENING MORTAR MIX 100% SOLIDS 2 PART REPAIR KIT CONCRETE METAL WOOD & MORE

POLYESTER PATCH POLYESTER MORTAR MIX PERMANENT 100% SOLIDS RESURFACING AND BONDING COMPOUND - SIZES 25lb is a HALF UNIT and 50lb is a FULL UNIT

SAVE THOUSANDS OF DOLLARS ON REPAIRS THAT LAST INSTEAD OF REDOING THE WHOLE AREA!!!!!!!

This product is ideal for patching concrete floors, garage floors cinderblock walls, basement floors brick walls, asphalt lots and roads, driveways, damaged chimneys, wooden support beams, wooden stairs, concrete cracks, metal cracks. Bonds to concrete, asphalt, wood, metal and more. 

Excellent because it bonds to surfaces on a molecular level. Its rock solid, fast drying which is great for areas where you can't afford to have down time because of non-stop traffic. Also, it works so well you can avoid costly construction of new concrete slabs etc. Excellent for concrete floors that are subject to heavy abrasive traffic equipment like trucks and forklifts. Cures in as little as 15 minutes. It is also chemical and corrosive chemicals resistant formula. Our kit comes complete with Resin and Aggregate. Easy to use just mix in pail with an electric drill on low with a mixer for best results. Then just trowel out to a smooth high impact chemical resistance surface.

Poly Patch is a unique and complete pre-mixed polyester mortar. Usage is simple even under the most extreme conditions. When mixed, Poly Patch provides a high strength patching mortar, which can be applied with a feathered edge.

DIRECTIONS:

Clean surfaces of loose aggregate, dirt, grease and oils. (For best results heavy grease, imbedded dirt and oils should be removed with one of our heavy-duty cleaner degreasers available in our store. Allow to dry thoroughly or blow it out to speed up the process. Remove gallon can of resin pour all powdered material into a clean dry five-gallon pail. Then pour all of the resin in the pail that product came in. Then add powder aggregate slowly, mixing consistently. For best results use a low-speed electric drill with a mixer attachment.

Poly Patch may be used in areas with a wide range of temperatures.

Poly Patch will cure and set to a molecular bond in 25 minutes at 0 degrees to -32 degrees F.

Poly Patch will cure and set in 15 minutes at temperatures exceeding 32 degrees F.

Complete with aggregate and poly liquid resin nothing else to mix.

Easy to apply, gives professional results.