Protect Shield is a commercial quality product. It will seal and waterproof your pavers, concrete, stone, slate and other mineral based materials. This polymer-based emulsion does not require a catalyst for application. This product is a self-curing polymer that provides excellent water and oil repellency as well as protection from salt and natural elements. Due to its unique functionality this will provide superior performance. It can be used on new concrete to keep the water in while concrete is curing.
PROTECT SHIELD CHEMICAL 24 Hour SPOT TEST RESULTS Scale Rating 1-10 (1=WORST) (10=BEST)
Porous Surface Sealer Antifreeze 10
Outstanding Gloss Bearing Grease 10
Water Resistant Transmission Fluid 10
Non-Yellowing Motor Oil 10
Brightens Stonework Bleach 10
Long Lasting 37% Hydrochloric Acid 10
Low Sensitivity to Amine Containing Strippers 37% Sulfuric Acid 9
10% Ammonium Hydroxide 10
Mono Ethanolamine 10
50% Sodium Hydroxide 10
Methanol 10
Mineral Spirits 10
Tide Laundry Soap 10
10% Trisodium Phosphate 10
DIRECTIONS: Apply by brush, roller, or simply spray on. Apply even coats. Allow to dry completely before applying additional coats. Application will leave a slight gloss. product will seal porous surfaces wait a oil and waterproofing surface. One gallon should cover from 150-350 square feet depending on how porous the material is. Allow to air dry for 24 hours before contacting with water is made.